Office of Technology Commercialization

Innovations: Materials and Manufacturing Category

Back to all technologies People Keywords
Innovation Title Categories Lead Inventor
Enhanced Laser Shock by Liquid Confinement
66046
  1. Materials and Manufacturing
Cheng, Gary J
Grip Design to Accommodate Numerous Specimens for Versatile Mechanical Testing Device for In-reactor Testing.
2023-OKUN-69969
  1. Mechanical Engineering
  2. Materials and Manufacturing
Okuniewski, Maria A
Conductive Multifunctional Composite Preform (M-TOW)
2022-MANS-69667
  1. Materials and Manufacturing
Mansson, Jan-Anders
Novel Interchangeable Filter for Virus Filtration and Inactivation
2022-CAST-69657
  1. Materials and Manufacturing
  2. Biomedical Engineering
Castillo, Luciano
Low-cost, Wireless Radiation Sensor
2022-RAHI-69718
  1. Biomedical Engineering
  2. Materials and Manufacturing
Rahimi, Rahim
Power Devices with Improved Short-Circuit Withstand Time and On-Resistance
2023-COOP-69947
  1. Electrical Engineering
  2. Materials and Manufacturing
Cooper, James Albert
Novel methane pyrolysis reaction for clean Hydrogen production
2023-OZAL-70029
  1. Materials and Manufacturing
  2. Green Technology
Ozalp, Nesrin
Eco-Friendly Food Packaging Composed of Cellulose Nano Fiber and Molded Pulp
2022-YOUN-69555
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Youngblood, Jeffrey P
Phase transforming cellular matrix for self-healing non-pneumatic tires and durable runway tiles
2019-ZAVA-68691
  1. Materials and Manufacturing
Zavattieri, Pablo D
Hybrid 3D Printed Runway and Floor Mats
2022-ZAVA-69900
  1. Materials and Manufacturing
Zavattieri, Pablo D
Enhancement of oxidative stability of lithium metal batteries (LMBs) using ether-based electrolytes
2021-POL-69529
  1. Chemical Engineering
  2. Materials and Manufacturing
Pol, Vilas G
Bendable On-site Thermo Energy Harvester
2020-YAZA-69128
  1. Electrical Engineering
  2. Materials and Manufacturing
Yazawa, Kazuaki
Impact Sensing for Pedestrian Protection with Piezoelectric Flexible Conformable Composite Film Sensors
2022-CAKM-69813
  1. Mechanical Engineering
  2. Materials and Manufacturing
Cakmak, Mukerrem
High Resolution Microfluidic Channel Fabrication via Additive Manufacturing
2021-LI-69399
  1. Mechanical Engineering
  2. Materials and Manufacturing
Li, Tian
Electrocatalytic materials to enhance methanol fuel cell function
2023-WU-69964
  1. Green Technology
  2. Materials and Manufacturing
Wu, Wenzhuo
Electrically Customizable 3D Printer Filament
2022-NEWE-69740
  1. Materials and Manufacturing
  2. Electrical Engineering
Newell, Brittany A
Composite Board Binder Systems from Rice Lignin
2021-CARU-69444
  1. Chemical Engineering
  2. Materials and Manufacturing
Caruthers, James M
Extension of Phenol-Based Laminating Resins with Depolymerized Rice and Wood Lignin Resins
2022-CARU-69614
  1. Chemical Engineering
  2. Materials and Manufacturing
Caruthers, James M
Low-Cost Wireless Humidity Sensors for Smart Packaging
2022-RAHI-69719
  1. Food and Nutrition
  2. Materials and Manufacturing
Rahimi, Rahim
Methods for Catechol Containing Polymer Synthesis for Large Scale Production
2020-WILK-68871
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Wilker, Jonathan J
Zein- and Tannic Acid-based Bio-inspired Adhesives for Surgical Applications
2022-WILK-69807
  1. Materials and Manufacturing
  2. Biomedical Engineering
Wilker, Jonathan J
A Method for Mitigating Carbon Fouling Using Electrochemical Etching
2022-POUR-69669
  1. Materials and Manufacturing
  2. Aeronautics
Pourpoint, Timothee Louis
Substrate-Free Two-Dimensional Elemental Twin-Crystals with Co-Existing Opposite Chirality
2021-WU-69239
  1. Materials and Manufacturing
  2. Electrical Engineering
Wu, Wenzhuo
Additive Manufacturing of Functional Materials
2022-NAWR-69857
  1. Materials and Manufacturing
Nawrocki, Robert A
A Novel Robotic Gripper with Adaptative Stiffness
2022-GAN-69770
  1. Materials and Manufacturing
  2. Mechanical Engineering
Gan, Dongming
Novel Building Envelope Materials with Enhanced Durability that Reduce Energy Consumption.
2022-VELA-69766
  1. Green Technology
  2. Materials and Manufacturing
Velay Lizancos, Maria Mirian
Mussel-Inspired Adhesives Containing Gallol Groups
2022-WILK-69827
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
Method of Cryogenic Quenching in the Surface Treatment of Aluminum Alloys
2021-SHIN-69286
  1. Materials and Manufacturing
  2. Mechanical Engineering
Shin, Yung C
Sensor System for the Early Detection of Thermal Runaway in Lithium-Ion Batteries
2022-POL-69634
  1. Materials and Manufacturing
  2. Chemical Engineering
Pol, Vilas G
Predicting Failures in Smart Resin Vat Photopolymerization 3D Printing
2022-MAO-69748
  1. Materials and Manufacturing
  2. Mechanical Engineering
Mao, Huachao
High-Strength Adhesives from Sustainable Components
2022-WILK-69829
  1. Materials and Manufacturing
  2. Green Technology
Wilker, Jonathan J
Positively Charged Adhesives for Both Wet and Dry Environments
2022-WILK-69830
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Wilker, Jonathan J
Biomimetic Phosphorylated Polymer for Adhesion Under Dry and Wet Conditions
2020-WILK-69126
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
New Lead Free Primary Explosives
2020-PIER-69143
  1. Chemical Engineering
  2. Materials and Manufacturing
Piercey, Davin Glenn
Hybrid Sensing of Electric Field with Quantum Spin Defects Coupled to Nanomagnets
2021-SHAL-69281
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Upadhyaya, Pramey
Morphable 3D Printers for Additive and Subtractive Manufacturing
2020-MALS-68950
  1. Materials and Manufacturing
  2. Mechanical Engineering
Malshe, Ajay P
Metal Free Primary Explosives
2020-PIER-69117
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Piercey, Davin Glenn
A New Approach for Synthesizing More-Recyclable Polymers
2021-DOU-69508
  1. Materials and Manufacturing
  2. Chemical Engineering
Dou, Letian
Method for the Synthesis of Chalcogenide Perovskite Films for Semiconductor Applications
2022-AGRA-69825
  1. Chemical Engineering
  2. Materials and Manufacturing
Agrawal, Rakesh
Sequence-Controlled Polymers for Sustained Release of Pharmaceutical Ingredients
2022-WON-69547
  1. Pharmaceuticals
  2. Materials and Manufacturing
Won, You-Yeon
Anticorrosion Coatings from a Biomimetic Polymer
2022-WILK-69600
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
DESIGN AND MANUFACTURING OF SUSTAINABLE BATTERY ELECTRODE WITH HIGH ACTIVE MATERIAL CONTENT
2022-LEE-69590
  1. Materials and Manufacturing
Lee, Sunghwan
A Thin and Light-weight Coating of Boron Nitride Paints for Efficient Radiative Cooling
2022-RUAN-69542
  1. Green Technology
  2. Materials and Manufacturing
Ruan, Xiulin
All Printed Low-Cost Gamma Radiation Dosimeter for Sterilization Monitoring Applications
2021-RAHI-69188
  1. Materials and Manufacturing
Rahimi, Rahim
Cell Phone Integrated Paper Microfluidic Device for Colorimetric Multiplexed Detection of Analytical Targets
2020-STAN-68920
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Stanciu-Gregory, Lia A Antoaneta
Self-Extinguishing, Toxic Gases Containment Enclosure for Lithium-Ion Batteries
2020-MARI-69060
  1. Materials and Manufacturing
  2. Mechanical Engineering
Marinero-Caceres, Esteban Ernesto
Room Temperature Single-Photon Emitters in Silicon Nitride
2021-SHAV-69443
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Shalaev, Vladimir M
Soft, Stretchable, Strain-Insensitive Biosensors from Dispensable Poroelastic Biomaterials
2021-LEE-69211
  1. Biomedical Engineering
  2. Materials and Manufacturing
Lee, Chi Hwan
Formulation for Controlled Dispersion of Cellulose Nanomaterials
2021-YOUN-69372
  1. Materials and Manufacturing
  2. Mechanical Engineering
Youngblood, Jeffrey P
Reversible Thermo-Power Parka Jacket
2018-YAZA-68227
  1. Materials and Manufacturing
Yazawa, Kazuaki
Repeatable Method for Inexpensive Manufacturing of Smooth Surface Gratings
2019-BRAV-68548
  1. Materials and Manufacturing
Garcia Bravo, Jose Manuel
Efficient Rare Earth Element Recovery
2014-WANG-66915
  1. Chemical Engineering
  2. Materials and Manufacturing
Wang, Nien-hwa L
Hydrophobic Surface Coating for Virus Inactivation
2021-CAST-69350
  1. Materials and Manufacturing
  2. Mechanical Engineering
Castillo, Luciano
Mechanically Robust and Self-Healable Perovskite Solar Cells
2020-DOU-69145
  1. Materials and Manufacturing
  2. Chemical Engineering
Dou, Letian
New Aromatic Polyamide Reverse Osmosis Membranes to Prevent Biofilm Formation and Irreversible Chlorination
2021-HOWA-69294
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Toomey, Michael D
Surface Molecular Film to Combat Sinuous Flow for Cutting Metal
2019-CHAN-68634
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Chandrasekar, Srinivasan "Chandy"
Deterministic Culturing of Single Cells in 3D
2020-SAVR-69076
  1. Biotechnology
  2. Materials and Manufacturing
Savran, Cagri Abdullah
Chia Seed Mucilage/Polyol Mixture as a Biofilm for Packaging
2021-LICE-69229
  1. Materials and Manufacturing
  2. Food and Nutrition
Liceaga, Andrea M
High Temperature Thermal Dual-Barrier Coating
2021-JACO-69259
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Jacob, Zubin
Single Domain LiNbO3 Thin Films Integration via a Seed Layer Approach
2021-WANG-69382
  1. Materials and Manufacturing
  2. Electrical Engineering
Wang, Haiyan
Soan Ware
2019-MILL-68584
  1. Materials and Manufacturing
  2. Food and Nutrition
Miller, Quinci Danielle
Method of Making Transparent Alumina by Hot-pressing Platelets into an Aligned Grain Microstructure
2020-YOUN-68913
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Youngblood, Jeffrey P
High Power Microwave Generator Based on Nonlinear Composites
2021-FAIR-69397
  1. Materials and Manufacturing
  2. Electrical Engineering
Fairbanks, Andrew Jonathan
Additive Manufacture of Al-Ti-C Metal Matrix Composite
2021-WANG-69224
  1. Materials and Manufacturing
  2. Mechanical Engineering
Wang, Xiaoming
Roll-to-Roll Manufacturing of Printed Electrochemical Sensors with Real-Time Image Processing and Machine Learning for Predictive Analysis
2021-RAHI-69276
  1. Materials and Manufacturing
  2. Computer Technology
Rahimi, Rahim
Novel N-type Electroactive Polymer
2021-UYED-69342
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Uyeda, Christopher H
Safer High-Voltage Solid-State Batteries
2020-POL-68955
  1. Materials and Manufacturing
  2. Chemical Engineering
Pol, Vilas G
Wearable Ozone Generating System for Treatment of Infected Dermal Wounds
2020-RAHI-69057
  1. Biotechnology
  2. Materials and Manufacturing
Rahimi, Rahim
Nanoparticle Deposition on Polymeric Fibers for Antimicrobial Filter Applications
2021-BAHR-69228
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Bahr, David Frederick
Silicone Padding Embedded in Fabric
2019-NAUM-68593
  1. Materials and Manufacturing
  2. Biotechnology
Nauman, Eric A
A Thermal Switch and Regulator Device Based on Graphene Foams
2020-RUAN-68896
  1. Mechanical Engineering
  2. Materials and Manufacturing
Ruan, Xiulin
Reliable Containment of High-Temperature Molten Halide Salts for Thermal Energy Storage
2020-SAND-69026
  1. Materials and Manufacturing
  2. Chemical Engineering
Sandhage, Kenneth H
A New Method of Preparing Sodium Nitrotetrazolate
2020-PIER-69115
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Piercey, Davin Glenn
Imaging Technique for Pavement Macrotexture Determination
2020-TIAN-68884
  1. Civil Engineering
  2. Materials and Manufacturing
Tian, Xiangxi
Improved Method for Producing Carbon Fiber
2017-POL-67808
  1. Chemical Engineering
  2. Materials and Manufacturing
Pol, Vilas G
New Piezoelectric/resistive Hybrid Systems for Structural Health Monitoring (SHM)
2019-CAKM-68503
  1. Materials and Manufacturing
  2. Civil Engineering
Cakmak, Mukerrem
New Fabrication Process for Hypersonics
2019-SAND-68537
  1. Materials and Manufacturing
  2. Aeronautics
Sandhage, Kenneth H
Automated Charge Testing and Accurate Dispersion for Refrigerants
2020-BRAU-68857
  1. Mechanical Engineering
  2. Materials and Manufacturing
Braun, James Edward
Continuous Extrusion of Cellulose Nanofiber Slurry
2020-YOUN-68912
  1. Materials and Manufacturing
  2. Green Technology
Youngblood, Jeffrey P
Partial to Full Esterification of Tannic Acid to Produce Fire Retardant Epoxy Formulations
2020-YOUN-69027
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Youngblood, Jeffrey P
Surface Mechanical Grinding Treatment Setup and Tools for Processing Bulk Metallic Materials
2019-ZHAN-68391
  1. Materials and Manufacturing
  2. Mechanical Engineering
Zhang, Xinghang
Microstructurally Engineered Perovskite Gas Sensors
2020-RAMA-68732
  1. Mechanical Engineering
  2. Materials and Manufacturing
Ramanathan, Shriram
Device for Large Area Monolayer Film Fabrication
2019-CLAR-68356
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Claridge, Shelley A
Transfer of Ultrathin Polymerized Molecular Films
2019-CLAR-68357
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Claridge, Shelley A
Cloud-Based Smart Sync Supply Chain Management System for Emergency Response
2017-YIH-67918
  1. Materials and Manufacturing
  2. Computer Technology
Yih, Yuehwern
Efficient Electrochromic Materials for use in Smart Windows and Tunable Optical Elements
2018-RAMA-68319
  1. Materials and Manufacturing
Sun, Yifei
Light Confining Devices Using All-Dielectric Metamaterial Cladding
2019-ZUBI-68594
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Jacob, Zubin
Methods to Improve Cycling Stability of Electrochromic Thin Films
2020-MEI-68819
  1. Materials and Manufacturing
  2. Mechanical Engineering
Mei, Jianguo
Biomimetic Adhesives for Biomedical and Other Industrial Applications
2018-WILK-68499
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
Production of Rice Straw Fiber Board Using Lignin from Catalytically Depolymerized Rice Straw
2020-CARU-68907
  1. Materials and Manufacturing
Caruthers, James M
Superlattices for Metamaterial Applications in the Visible Range
66323
  1. Electrical Engineering
  2. Materials and Manufacturing
Shalaev, Vladimir M
Method for Processing Large-scale Nanohole Framework
2019-WANG-68641
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Wang, Haiyan
One-Step Method of Fabricating Tunable Vertically Aligned Nanocomposites (VANs)
2019-WANG-68676
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Wang, Haiyan
Incorporation of Nanocellulose in Melt-Processed Polymers Without Solvent
2019-YOUN-68348
  1. Materials and Manufacturing
Youngblood, Jeffrey P
A Simplified Method for Ambient Temperature Production of Sheet Metal
2019-TRUM-68353
  1. Materials and Manufacturing
Trumble, Kevin Paul
Ultra-strong Aluminum Alloy Formulation with Superior Thermal Stability at High Temperatures
2019-LI-68692
  1. Materials and Manufacturing
Li, Qiang
Method for Synthesis of Highly Stable Lateral Heterostructures of 2D Halide Perovskites
2019-DOU-68710
  1. Chemical Engineering
  2. Materials and Manufacturing
Dou, Letian
Methods of Fabricating Refractory Complex Concentrated Alloys
2020-SAND-69002
  1. Materials and Manufacturing
Sandhage, Kenneth H
Novel Absorbance-Based Colorimetry from Droplets on Nonwetting Substrates
2020-WEIB-68749
  1. Materials and Manufacturing
  2. Mechanical Engineering
Weibel, Justin A
Washable, Flexible, Self-Powered e-Textiles
2019-MART-68695
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Martinez, Ramses Valentin
Making Ceramics Ductile at Lower Temperatures
2019-LI-68418
  1. Materials and Manufacturing
Li, Jin
Novel Materials for High Temperature Organic Electronics
2018-MEI-68125
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Mei, Jianguo
Simpler, Defect-free Assembly of 3D Metal-Dielectric Nanoarrays for Surface Plasmon Applications
2019-LEE-68567
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Lee, Chi Hwan
Modulating Surface Wetting of 2D Materials
2018-CLAR-68024
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Claridge, Shelley A
Tuning the Strength and Ductility of a Biomimetic Adhesive Through Breakable Bonds: Designing the "Ideal Adhesive"
2017-WILK-67740
  1. Materials and Manufacturing
Wilker, Jonathan J
Manufacturing Semiconducting Polymer Blends for Organic Transistors
2017-MEI-67741
  1. Materials and Manufacturing
  2. Chemical Engineering
Mei, Jianguo
Inhibiting Molten Salt Infiltration of Porous Materials
2020-SAND-68768
  1. Materials and Manufacturing
Sandhage, Kenneth H
Making aluminum shine like gold: Laser-induced Color Printing on Nanostructured Metal Films
2019-NYGA-68517
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Nyga, Piotr
Integrated Thermoelectric Film Based Woven Power Generator
2019-YAZA-68590
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Yazawa, Kazuaki
Wearable & Stretchable Electromagnetically-Coupled Radiofrequency Probes
2019-RISP-68630
  1. Biomedical Engineering
  2. Materials and Manufacturing
Rispoli, Joseph Vincent
Sustainable Cross-linked Nanocellulose Coatings and Materials
2019-YOUN-68712
  1. Materials and Manufacturing
  2. Green Technology
Youngblood, Jeffrey P
Roll-to-Roll Processing of Metallic Nanostructures Using Laser-Induced Superplasticity
2018-MART-68338
  1. Materials and Manufacturing
Martinez, Ramses Valentin
Surface Hardening Mechanism for Metal Particles for Surface Treatment Applications
2019-BAHR-68552
  1. Materials and Manufacturing
Bahr, David Frederick
Composite Heat Sink for Enhanced Thermal Management
2019-MARC-68563
  1. Materials and Manufacturing
  2. Electrical Engineering
Marconnet, Amy Marie
Production of Substrate-Free Two-Dimensional Telluride Materials
2019-WU-68445
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Wu, Wenzhuo
Sustainable Routes for Design of Flexible Ultranarrow Gold Wires
2019-CLAR-68546
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Claridge, Shelley A
Novel Design for Pressure-Adaptive Piston Pump
2019-VACC-68635
  1. Mechanical Engineering
  2. Materials and Manufacturing
Vacca, Andrea
Safe, High Ionic Conductivity, Solid-State Electrolyte for Lithium-ion Batteries
2019-MARI-68558
  1. Materials and Manufacturing
Marinero-Caceres, Esteban Ernesto
Hybrid Nanomanufacturing of Semiconductor Nanostructures on Printed Liquid Metal for Stretchable, Wearable Devices
2017-WU-67651
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Wu, Wenzhuo
Production of Substrate-Free Bismuthene Nanoflakes
2019-WU-68444
  1. Materials and Manufacturing
  2. Electrical Engineering
Wu, Wenzhuo
Wearable High-Dielectric-Constant Polymers with Core-shell Liquid Metal Inclusions for Biomechanical Energy Harvesting and Self-powered User Interface
2019-WU-68431
  1. Materials and Manufacturing
  2. Biomedical Engineering
Wu, Wenzhuo
Mechanically, Thermally, and Chemically-Robust (Oxidation/Corrosion-Resistant) High-Temperature Ceramic/Metal Composites
2019-SAND-68340
  1. Materials and Manufacturing
Sandhage, Kenneth H
Potassium-Ion Battery -- An alternative to the lithium-ion battery
2019-POL-68386
  1. Chemical Engineering
  2. Materials and Manufacturing
Pol, Vilas G
Mechanically Robust High Temperature Composites and Processes for Manufacturing Such Composites
2017-SAND-67675
  1. Materials and Manufacturing
Sandhage, Kenneth H
High-Strength Nickel via Hybrid Techniques
2018-ZHAN-68097
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Zhang, Xinghang
Toughened Ceramic Composite Components for High-Temperature Systems
2016-SAND-67513
  1. Materials and Manufacturing
  2. Electrical Engineering
Sandhage, Kenneth H
Method and Materials for Achieving Corrosion Resistance
2016-SAND-67546
  1. Materials and Manufacturing
  2. Chemical Engineering
Sandhage, Kenneth H
Electrical Resistance Measurements Quantify Asphalt Emulsion Curing Times
2017-HADD-67819
  1. Civil Engineering
  2. Materials and Manufacturing
Haddock, John E
Printing with Continuous Multifunctional Composite Materials
2018-BARO-68084
  1. Materials and Manufacturing
Pipes, Robert Byron
Detection of Subsurface Fractures in Rocks for Oil Recovery and Subsurface Sequestration
2018-NOLT-68092
  1. Materials and Manufacturing
  2. Chemical Engineering
Pyrak-Nolte, Laura J
Antibacterial Surface Treatment for Hardened Metals
2017-BAHR-67842
  1. Materials and Manufacturing
  2. Food and Nutrition
Bahr, David Frederick
Continuous Roll-to-Roll Fabrication of High Performance Transparent CNC Coatings for Plastic
2018-YOUN-68048
  1. Materials and Manufacturing
Youngblood, Jeffrey P
Adhesion Improvement via Laser Nanostructuring
CRANE-103030
  1. NSWC Crane
  2. Materials and Manufacturing
Seghi, Steven
Ultra-Sensitive Naval Electric Field Sensor Using Advanced Materials
2018-RAMA-68011
  1. Materials and Manufacturing
  2. Mechanical Engineering
Ramanathan, Shriram
Method of Enhancing Electrical Conduction in Gallium-Doped Zinc Oxide Films
2017-CHEN-67676
  1. Materials and Manufacturing
  2. Electrical Engineering
Cheng, Gary J
Novel Structure for Controllable Acoustic Wave Propagation
2018-SEMP-67996
  1. Materials and Manufacturing
  2. Mechanical Engineering
Semperlotti, Fabio
Snap Fit Assembly for a Ruggedized Multi-Section Structure with Selective Embrittlement or Case Hardening
CRANE-200274
  1. NSWC Crane
  2. Materials and Manufacturing
Scheid, Eric
Testing Apparatus for Simulating Rain and Fog
CRANE-101270
  1. NSWC Crane
  2. Materials and Manufacturing
Hamilton, John
Method of Increasing the Surface Hardness of a Fragmentation Device
CRANE-103258
  1. NSWC Crane
  2. Materials and Manufacturing
Scheid, Eric
Method for Investigating Early Liner Collapse in a Shaped Charge
CRANE-103114
  1. NSWC Crane
  2. Materials and Manufacturing
Scheid, Eric
Large Scale Nanomanufacturing of Two-Dimensional Tellurium (Tellurene)
2017-WU-67652
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Wu, Wenzhuo
Novel Oil-Free Solid Lubricant
2017-POL-67881
  1. Chemical Engineering
  2. Materials and Manufacturing
Pol, Vilas G
Cured-in-Place Pipe (CIPP) Emission Capture System
2017-WHEL-67875
  1. Green Technology
  2. Materials and Manufacturing
Whelton, Andrew J
Auto-Feeding, Permanent Magnet Drill
CRANE-103113
  1. NSWC Crane
  2. Materials and Manufacturing
Scheid, Eric
High-Strength, Nontoxic Adhesives from Plant Components
2017-WILK-67873
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
Radiation-Absorbing Materials and Surfaces
65586
  1. Electrical Engineering
  2. Materials and Manufacturing
Narimanov, Evgeniy E.
Electrostatically Supported Nanopore Based Water Desalination
2017-KUBI-67757
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Kubis, Tillmann C
High Strength Nanotwinned Al Alloys with 9R Phase
2017-ZHAN-67836
  1. Materials and Manufacturing
Zhang, Xinghang
Structures and Methods of Manufacture of Microstructures within a Structure to Selectively Adjust a Response or Responses of Resulting Structures or Portions of Structures to Shock Induced Deformation or Force Loading
CRANE-103025
  1. NSWC Crane
  2. Materials and Manufacturing
Scheid, Eric
Printed Tooling with Heating Circuits Printed In Situ
2017-PIPE-67662
  1. Materials and Manufacturing
Pipes, Robert Byron
Method for Achieving Corrosion Resistance of Solids in Molten Salts
2017-SAND-67813
  1. Materials and Manufacturing
Sandhage, Kenneth H
Tannic Acid as a Functional Crosslinker in Polymer Systems
2017-YOUN-67826
  1. Materials and Manufacturing
  2. Biotechnology
Youngblood, Jeffrey P
Safety Critical Control Device
CRANE-102500
  1. NSWC Crane
  2. Materials and Manufacturing
Reed, William
Vacuum Immersion Test Set
CRANE-103027
  1. NSWC Crane
  2. Materials and Manufacturing
Farmer, Harry
Method and Process to Fabricate Hydrophobic Microchannels
2017-SHIN-67659
  1. Materials and Manufacturing
  2. Mechanical Engineering
Shin, Yung C
Multi-Tool Roll-to-Roll Manufacturing Line to Produce Multifunctional Polymer Films
2017-CAKM-67673
  1. Materials and Manufacturing
  2. Electrical Engineering
Cakmak, Mukerrem
Water Cleaning System for Ultrasonic Testing
CRANE-101269
  1. NSWC Crane
  2. Materials and Manufacturing
Whitner, John
Method and System for Printing Flexible Sensors into Substrates
2016-KRAM-67277
  1. Materials and Manufacturing
Kramer Bottiglio, Rebecca
Bioinspired Glue for Marine Applications
2016-WILK-67559
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
Continuous Lyophilization Roll-to-Roll Manufacturing and Metrology System
2017-CAKM-67672
  1. Materials and Manufacturing
Cakmak, Mukerrem
Plasmonic Metal Nitride and TCO Nanostructures
2016-KILD-67609
  1. Materials and Manufacturing
  2. Green Technology
Kildishev, Alexander V.
Laser-Based Fabrication of Metal Nanocomposites on Flexible Substrates
2017-WU-67660
  1. Materials and Manufacturing
  2. Electrical Engineering
Wu, Benxin
Advanced Fragmentation Structure
CRANE-103388
  1. NSWC Crane
  2. Materials and Manufacturing
Scheid, Eric
Compact Oxygen Gas Sensing for Internal Combustion Engines for Large Range of Operating Temperatures
2016-LI-67319
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Li, Tongcang
Transient Liquid Phase Bonding
2016-HAND-67586
  1. Materials and Manufacturing
Handwerker, Carol A
Simulate the Deformation and Evolution of Heterogeneous Microstructures with Electroplates
2016-GARC-67608
  1. Materials and Manufacturing
  2. Computer Technology
Garcia, R Edwin
Controlling Surface Texture with Modulation-Assisted Machining
65820
  1. Mechanical Engineering
  2. Materials and Manufacturing
Chandrasekar, Srinivasan "Chandy"
Lean Minimal Chair
2016-KIM-67285
  1. Materials and Manufacturing
Kim, Tong Jin
Sharing Chair
2016-KIM-67286
  1. Materials and Manufacturing
Kim, Tong Jin
A Process to Produce Conformal Nano-Composite Coatings Using Chemical Vapor Deposition and Nano-Structures
CRANE-102541
  1. NSWC Crane
  2. Materials and Manufacturing
Deshpande, Nishkamraj U
MiniPharm: Miniaturized Continuous End-to-End Manufacturing of Solid Pharmaceuticals
2015-NAGY-67209
  1. Pharmaceuticals
  2. Materials and Manufacturing
Nagy, Zoltan Kalman
Laser-Assisted Micromachining Systems for Contouring Complex Features
2015-SHIN-67048
  1. Materials and Manufacturing
  2. Mechanical Engineering
Shin, Yung C
Open Optoelectrowetting Droplet Device
65147
  1. Materials and Manufacturing
  2. Electrical Engineering
Wereley, Steven Truitt
Electrical Steel Strip Processing Method
2015-TRUM-67224
  1. Materials and Manufacturing
  2. Electrical Engineering
Trumble, Kevin Paul
Functionalized Cellulose Nanocrystal Materials and Methods of Preparation
2016-YOUN-67354
  1. Materials and Manufacturing
Youngblood, Jeffrey P
Method of Making Nanocrystalline Metal Flakes via Ultrasonic Shot Peening
2016-HAN-67260
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Han, Qingyou
Safe, Renewable Adhesive
2016-WILK-67324
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
Calibration Method for Structured Light System Using a Telecentric Lens
2016-ZHAN-67257
  1. Materials and Manufacturing
  2. Micro & Nanotechnologies
Zhang, Song
Functionalized Sponges for Rapid and Robust Oil-Water Separation
2016-WEIB-67262
  1. Materials and Manufacturing
  2. Green Technology
Weibel, Justin A
Method Reduces Nitrogen Oxide Emission Levels
2016-GOUN-67299
  1. Chemical Engineering
  2. Materials and Manufacturing
Gounder, Rajamani P
Hydrogel Improves Concrete Curing
2015-ERK-67079
  1. Civil Engineering
  2. Materials and Manufacturing
Erk, Kendra Ann
A Method for Improving Machinability of Metals
2016-CHAN-67237
  1. Mechanical Engineering
  2. Materials and Manufacturing
Chandrasekar, Srinivasan "Chandy"
Method and Materials to Control a Ballistic Projectile's Lethality
2015-MARI-67153
  1. Materials and Manufacturing
  2. Mechanical Engineering
Marinero-Caceres, Esteban Ernesto
A Method of Drilling Non-Straight Holes Using Laser Ablation and Plasma Amplification
2015-SHIN-67218
  1. Materials and Manufacturing
  2. Mechanical Engineering
Shin, Yung C
Tin Whisker Manufacturing, Detection, Response, and Compound Manufacturing Apparatus and Method
CRANE-102717
  1. NSWC Crane
  2. Materials and Manufacturing
Deshpande, Nishkamraj U
An Improved Method for Intergranular Corrosion and Intergranular Stress Corrosion Cracking Resistance
CRANE-103029
  1. NSWC Crane
  2. Materials and Manufacturing
Deshpande, Nishkamraj U
Novel Cu-Mn Casting Alloys
2015-TRUM-67008
  1. Materials and Manufacturing
  2. Mechanical Engineering
Trumble, Kevin Paul
Melt-Processable Semiconducting Polymers
2015-MEI-67027
  1. Electrical Engineering
  2. Materials and Manufacturing
Mei, Jianguo
Cotton Used as Base for Growth of Graphene
2015-FISH-67072
  1. Mechanical Engineering
  2. Materials and Manufacturing
Fisher, Timothy Scott
Polymer Blends with High Charge Mobilities and Enhanced Solution-Processability
2015-MEI-67151
  1. Electrical Engineering
  2. Materials and Manufacturing
Mei, Jianguo
High Performance Adhesives
2015-WILK-67233
  1. Materials and Manufacturing
  2. Chemistry and Chemical Analysis
Wilker, Jonathan J
Low Temperature Growth of Graphene on Arbitrary Substrates
2015-CHEN-66989
  1. Materials and Manufacturing
  2. Mechanical Engineering
Chen, Zhihong
Method to Disperse Nanocrystals to Enhance Epoxy Strength
2015-YOUN-66998
  1. Materials and Manufacturing
Youngblood, Jeffrey P
Safe and Environmentally Friendly Methods of Making Materials More Flame Retardant
2015-MEND-67022
  1. Chemical Engineering
  2. Materials and Manufacturing
Youngblood, Jeffrey P
Holey-Metal Microlenses
2013-KILD-66364
  1. Micro & Nanotechnologies
  2. Materials and Manufacturing
Kildishev, Alexander V.
Electroactive Polymer Chemical Treatment
2013-KRUT-66388
  1. Materials and Manufacturing
  2. Mechanical Engineering
Krutz, Gary W
Controlling Flow Localization in Machining Processes
2014-CHAN-66856
  1. Materials and Manufacturing
  2. Mechanical Engineering
Chandrasekar, Srinivasan "Chandy"
Novel Electrolyte Material for Li-ion Batteries
2015-MARI-67016
  1. Materials and Manufacturing
Marinero-Caceres, Esteban Ernesto
Material Extruder
CRANE-98843
  1. NSWC Crane
  2. Materials and Manufacturing
Scheid, Eric
Simulation Framework for the Design of Improved Battery Materials
2014-GARC-66760
  1. Materials and Manufacturing
  2. Electrical Engineering
Garcia, R Edwin
Laser Induced Controllable Forming of Nanowires
2013-CHEN-66359
  1. Materials and Manufacturing
Cheng, Gary J
Laser Induced Strain Engineering of Graphene
2013-CHEN-66360
  1. Materials and Manufacturing
  2. Electrical Engineering
Cheng, Gary J
Smart Belt: Damage Detection Technology
2014-KRUT-66659
  1. Materials and Manufacturing
  2. Mechanical Engineering
Krutz, Gary W
Inkjet Printing of Liquid Metal Dispersions
2015-KRAM-66944
  1. Mechanical Engineering
  2. Materials and Manufacturing
Kramer Bottiglio, Rebecca
Novel Support Structure Generation for 3D Printing
2015-BENE-67024
  1. Materials and Manufacturing
Benes, Bedrich
Metal Oxide Semiconductor Material for Thermoelectric Generators
65801
  1. Materials and Manufacturing
  2. Electrical Engineering
Sands, Timothy D.
Magnaframe: A Laminate Processing Frame
CRANE-99835
  1. NSWC Crane
  2. Materials and Manufacturing
Ferguson, Jason
Copper-Based Alloys Containing Carbon
2014-TRUM-66634
  1. Materials and Manufacturing
Trumble, Kevin Paul
Ultrathin, Planar, Plasmonic Metalenses
2013-KILD-66450
  1. Electrical Engineering
  2. Materials and Manufacturing
Kildishev, Alexander V.
Controlling Dissolution of Elemental Selenium Improves Selenide Nanoparticles
2014-AGRA-66627
  1. Materials and Manufacturing
  2. Chemical Engineering
Agrawal, Rakesh
Sound Barriers Utilizing Novel Material Structures
2013-SIEG-66571
  1. Materials and Manufacturing
  2. Mechanical Engineering
Siegmund, Thomas Heinrich
Production of Atomically Precise Clusters at Atmospheric Pressure
2014-COOK-66673
  1. Chemistry and Chemical Analysis
  2. Materials and Manufacturing
Cooks, Robert Graham
Producing Particulate Reinforced Composites
65690
  1. Materials and Manufacturing
Han, Qingyou
Copper-Based Casting Alloys and Production Process
65836
  1. Materials and Manufacturing
Trumble, Kevin Paul
Developing Antifouling Surfaces by Preventing Adhesion
65880
  1. Materials and Manufacturing
  2. Green Technology
Wilker, Jonathan J
Production of Bulk Forms of Metal Alloys by Machining-Based Processes
65748
  1. Materials and Manufacturing
Chandrasekar, Srinivasan "Chandy"
Improved Crystallization of Solar Cells
65614
  1. Materials and Manufacturing
Cheng, Gary J
Laser Crystallization at Low Temperature and Pressure
66045
  1. Materials and Manufacturing
Cheng, Gary J
Optimized Vertical Power DMOSFETs in Silicon Carbide
64281
  1. Mechanical Engineering
  2. Materials and Manufacturing
Cooper, James Albert
Volume Modified Fresnel Zone Plates
64715
  1. Materials and Manufacturing
Ersoy, Okan K
Cellulose Nanocrystal Films
65684
  1. Materials and Manufacturing
Youngblood, Jeffrey P
Shell-Activated Sintering of Core-Shell Particles
65400
  1. Electrical Engineering
  2. Materials and Manufacturing
Handwerker, Carol A
Cross-Linkable Polymeric Materials for Adhesion
64025
  1. Chemical Engineering
  2. Materials and Manufacturing
Wilker, Jonathan J
Laser Assisted Machining Method and Device
64325
  1. Materials and Manufacturing
Shin, Yung C
Generalized Intelligent Grinding Advisory System
64677
  1. Materials and Manufacturing
Shin, Yung C
High Voltage N-Channel Insulated Gate Bipolar Transistor (IGBT) in Silicon Carbide
64280
  1. Electrical Engineering
  2. Materials and Manufacturing
Cooper, James Albert
Thermally Conductive Smart Material
2013-SIEG-66389
  1. Materials and Manufacturing
Siegmund, Thomas Heinrich